World's Most Recognized Marketplace for Fabrics Custom Printing & More
Guidelines
Natural Fabrics
  • icon
    Cotton

    Woven fabric needs to be well processed RFD (Ready for Dyeing) Mercerized and Singeing done for good print quality. The fabric must be free of superficial fibers (no pilling) to avoid haziness in solid prints. Knits fabric should get treated with bio-wash for pilling free open width fabric requirement. Spandex fabrics should be Heat set process for Shrinkage control.

  • icon
    Viscose

    Woven fabric must be well processed RFD (Ready for Dyeing) for good print results. Good water absorbency for even color depth and penetration required. Knits fabric must be processed RFD and heat set with open width for Shrinkage Control.

  • icon
    Rayon / Modal / Linen

    Woven fabric should be well-processed RFD (Ready for Dyeing) with singeing process required for pilling free fabric surface. Good water absorbency need for consistent printing result. Knits fabric should be well processed RFD and heat set with open width for Shrinkage control.

  • icon
    Silk

    The fabric must be in ready to print form. Fabric defects like weaving or thread pull to be check carefully that may impact the end use of printed fabric. Knits fabric must have good water absorbency.

  • icon
    Wool

    The fabric must have good water absorbency a key factor in wool for good color penetration. The fabric must be in running length with minimum order quantity of 8 meters.

  • icon
    Blends

    We accept blends of Natural fabrics only. That means polyester or nylon blend with Natural are not acceptable. The Blend fabrics must be well RFD (Ready to Dyeing) and have good water absorbency.

Please read Shrinkage Guidelines carefully. We accept fabrics upto 180 cm (72”)width
Synthetic Fabrics
  • icon
    Polyester

    Polyester – Woven Fabric needs to be well processed for White base. The fabric must be free of creases / dirt marks / stains etc. for good print results. The maximum printable width for Polyester is up to 150 cm (60”) and we accept fabric accordingly. We don’t accept Nylon and Acrylic fabrics.

    Knits base fabrics must be heat set and well processed in open width format. We accept Jersey / Spandex / Dry Fit fabrics for printing.

  • icon
    Blends

    We accept blends with minimum 80% Polyester composition but recommendable 100% for good consistent intense color depth. We don’t accept blends of Nylon or Acrylic with Polyester.

Feel free to mail us on enquiries@texindiamart.com for more information
Shop Fabrics